Skip to content

show system ipt

Displays the current SLV IPT Listener settings - if the Lantronix Local Manager is configured to answer SIP calls, this command displays what will be reported. To view IPT tests that have been configured, use the show slv ipt command.

A valid SLV license must be applied to access this command. Licenses are managed on the Lantronix Control Center.

Command availability

CLI resource: system

Lantronix Local Managers: All

LMS offerings: Advanced

Syntax

show system ipt

Usage

duration - the length of the recorded message in seconds

endpoints - the number of calling numbers permitted

listen - true if IPT Listener is enabled, false if not

payload - the test recording selected.

[admin@LantronixLM]# show system ipt
duration 30
endpoints 10
listen true
payload harvardfemale

In the Lantronix web interface

Inventory > Local Manager page > Automation > IPT - specific to this system

History

3.4 - This command was introduced to replace show Local Manager ipt.

Related commands