Custom System Properties¶
The following custom system properties are available for configuration on the Local Managers.
SNMP
| Ver | Property | Description |
|---|---|---|
| * | sysContact.0 | When SNMP is enabled on the Local Manager, this property defines the system contact. |
| * | sysLocation.0 | When SNMP is enabled on the Local Manager, this property defines the system location. Useful if the Local Manager is behind a firewall or NAT. |
| 4.7.2 | _snmp_1.3.6.1.4.1.10243.10.1.5.5 | Set to "enable" if customer has a GPS attached to their Local Manager and would like the statistics to show up in SNMP. |
| 5.1 | _snmp_.1.3.6.1.4.1.2021.10.1 | Set to "enable" to get SNMP Load Average (UCD-SNMP-MIB). |
| 5.1 | _snmp_.1.3.6.1.2.1.25.2.3.1.1.1 | Set to "enable" to get SNMP Memory Info (HOST-RESOURCES-MIB). |
| 5.1 | _snmp_.1.3.6.1.2.1.25.2.3.1.1.31 | Set to "enable" to get SNMP Disk Info (HOST-RESOURCES-MIB). |
SSH
| Property | Description |
|---|---|
| sshPort | This property overrides the default port 22 for SSH connections. Useful if the Local Manger is behind a router with port forwarding capabilities. |
| sshIp | This property overrides the reported IP address when initiating an SSH connection with the Lantronix native Terminal Application. |
| sshIpv6 | Specifies an alternate IPv6 address to be used instead of the address reported by the Local Manager. |
| sshPortOob | This property overrides the default port 22 for SSH connections while the Local Manager is operating out-of-band. |
| sshIpOob | This property overrides the reported out-of-band IP address. Useful if the Local Manager is behind a firewall or NAT when it brings up its out of band connection. |
| sshIpv6Oob | Specifies an alternate IPv6 addressed to be used when the Local Manager is operating out-of-band. |
Certificates
The following properties are for use when placing the Local Manager in FIPS mode.
| Property | Description |
|---|---|
| _csr_OU | This property defines the Organization Unit required when generating a certificate. |
| _csr_CN | This property defines the Common Name required when generating a certificate. |
| _csr_O | This property defines the Organization required when generating a certificate. |
| _csr_L | This property defines the Location required when generating a certificate. |
| _csr_ST | This property defines the State required when generating a certificate. |
| _csr_C | This property defines the Country required when generating a certificate. |
| _csr_E | This property defines the Email Address required when generating a certificate. |
| _csr_other | This property defines other elements that the user may wish to include when generating a certificate. |