Registering Telematic Gateways & Modems

Use Lantronix Provisioning Manager to import and register Lantronix telematic gateway devices and modems to Percepxion. This requires an Internet connection on the computer running LPM as well as a Percepxion account.

LPM supports registration to Percepxion for the following telematic devices:

• BOLERO40 Series Telematic Gateway
• FOX3 Series Telematic Gateway
• FOX4 Series Telematic Gateway

To connect a computer to the telematic gateway:

1. Connect the device to the computer using an available serial port, then power on the device.
2. Click Telematic Gateways & Modems on the sidebar menu.
3. If a device is connected to the computer via serial, that COM port will be shown. If the COM port is not shown, check the serial connection between the device and the PC, then click the refresh button.
4. Select the appropriate COM port tile and click Connect. If successful, a window showing the device information will appear:
   

To import a telematic gateway to a Percepxion project:

1. In the device information window shown above, click the Project Import radio button.
2. Enter the project administrator Username and Password.
3. Click Continue to begin.
4. A window appears showing the operation status. When finished, LPM displays the message "Device registered successfully to Project Admin account".
5. Click Done.

To register a telematic gateway to an Organization Admin account:

1. In the device information window shown above, click the Registration radio button.
2. Enter the Percepxion Username, Password, Portal, and Organization. Use the LocalAdmin checkbox to indicate if the provided credentials are local or remote - if unchecked, the provided credentials are treated as remote admin credentials (LDAP, RADIUS, TACACS, SAML, etc.).
3. Click Continue to begin.
4. A window appears showing the operation status. When finished, LPM displays the message "Device registered successfully to Organization Admin account".
5. Click Done.