Modules¶

Modules are the building blocks of the firmware image, and where you will be spending the most time. There are a number of Lantronix-provided modules that you can include in your project. This means that your code only needs to take care of what you need to customize, and you don't need to re-create network configuration and management utilities.

The Lantronix modules are provided as binaries in the lantronix/modules directory, while the source examples and your custom modules are in the custom/module directory.

Naming¶

Directory and file names should not contain spaces or special characters. Do not create or rename a module that conflicts with the name of any Lantronix module. Lantronix modules can be found in lantronix/modules.

Don't use these names for custom modules, as they conflict with Lantronix-provided module names:

aes            bridge          bt_provisioning       cli                   discovery
mach10         main            modbus                modem_emulation       monitor
mux            ntp             security              smtp                  tunnel
usb_host       user_data       virtual_line          xserial

Structure¶

Modules have the following directory tree and files:

xPico200/custom/module/

     > /module_name/
          module_code.c  
          more_module_code.c

          > /bom/
               cfiles.make

          > /includes/
               custom_includes.h

          > /libraries/
               custom_libraries.a

          > /http/help/
               module.module_name.html

The includes, libraries, and http/help directories are optional.

Creating Modules¶

You have two options when creating modules. You can either copy one of the sample modules and modify it, or you can create a new module from scratch.

Option 1: Copy an existing module

1. In custom/module, copy a module directory. Take care not to use a name that conflicts with a Lantronix-provided module. See Naming.

2. Modify the code in the C file(s) or add more C files as needed.

3. If you change the name of existing C files or add new C files, update the CFILES variable in module_name/bom/cfiles.make to define the C file name(s).

4. Optionally, create an includes directory. See Includes.

5. Optionally, create a libraries directory and extend.make. See Libraries.

You should have a File Structure similar to the one outlined above.

Lantronix modules are not designed to work with other Lantronix modules without modification. To use multiple modules correctly, you may need to modify the code.

Option 2: Create a module from scratch

1. In custom/module, create a directory for the new module. Take care not to use a name that conflicts with a Lantronix-provided module. See Naming.

2. Create your C file(s) in the new module_name directory.

3. In module_name, create a bom directory.

4. In bom, create cfiles.make and define the CFILES variable as the location and name of the C file(s) in module_name.

5. Optionally, create an includes directory. See Includes.

6. Optionally, create a libraries directory. See Libraries.

You should have a File Structure similar to the one outlined above.

Registration, Startup, and Shutdown¶

Each module must provide a registration, startup, and shutdown functions that will be called during initialization.

The registration function is module_name_module_registration and should contain all of the module's registration calls.

The startup function is module_name_module_startup. All of the module registration functions are called before any of the startup functions, so at startup all of the registrations from other modules will be visible.

The shutdown function is module_name_module_shutdown. The shutdown function of each module is called just prior to the device powering down.

Includes¶

There are several Lantronix-provided includes available, and you can create your own. Lantronix includes are located in lantronix/includes. Refer to File List in the Developer Reference for information about includes that are available as part of the SDK.

When creating your own includes, you can either store them within the module that uses them, in custom/module/module_name/includes, or place them in custom/includes to allow multiple modules to make use of the same files.

Required includes¶

Two includes are required for all modules:

• module_name_module_defs.h is automatically generated when you run the make command. The name of the include is the module name with "_module_defs.h" appended.

• ltrx_compile_defines.h is delivered with SDK and is required for all modules.

extend.make¶

When your module makes use of includes, that module's directory should also include an extend.make file to define where the includes are located. Definemodule_name_INCLUDE_PATHS in the module's extend.make file to specify the paths to the includes used by the module.

Example:

bt_oem_provisioning_INCLUDE_PATHS := \
$(LANTRONIX_DIRECTORY)/includes/system/bcm943907/bluetooth \

Libraries¶

There are several Lantronix-provided libraries available, and you can create your own. Lantronix libraries are located in lantronix/libraries. Refer to File List in the Developer Reference for information about libraries that are available as part of the SDK.

When creating your own libraries, you can either store them within the module that uses them, in custom/module/module_name/libraries, or place them in custom/libraries to allow multiple modules to make use of the same files.

extend.make¶

When your modules make use of libraries, that module's directory should also include an extend.make file to define where libraries are located. Define module_name_LIBRARIES in the module's extend.make file to specify the paths to the libraries used by the module.

Example:

bt_oem_provisioning_LIBRARIES := $(MY_DIR)/libraries/ltrx_bt_essential.a \
  $(MY_DIR)/libraries/bluetooth_low_energy.ThreadX.NetX.ARM_CR4.release.a