Detailed Description

The spi_log module implements implements a rudimentary "SPI Protocol". When this protocol is chosen by a SPI, it logs whatever it receives on the SPI.

Build it from project "spiLogDemo".

To run it you will need to select protocol "Log" under SPI Configuration.

Also, you will need to enable the SPI CPs: Under CPM Roles Configuration, enable the SPI group of CPs. HINT: If using the evaluation board, you may place a jumper between JP5 pins CP3 and CP4 to effect a loopback of your SPI data. Note that the SPI group of CPs is ganged, so when you enable one, you enable them all. Also note that all the other CPM Roles referring to any of the SPI CPs must be disabled.