Assigning IP Address

Use Lantronix Provision Manager to set the IP address of a device. IP addresses can be assigned manually or automatically.

Assign IP Address Manually

To assign an IP address manually:

  1. Click Provision on the side menu.
  2. Select a device.
  3. Click Assign IP > Manually. In the window that appears, enter the IP address in quad-dot notation, then click Assign:
    Enter IP Address.
  4. An additional window appears:
    Set the IP Address.
    • Click No to re-enter the IP address.
    • Click Yes to continue; the device will reboot with the new IP address.

Assign IP Address Automatically

To assign an IP address automatically:

  1. Click Provision on the side menu.
  2. Select a device.
  3. Click Assign IP > Automatically.
  4. In the window that appears, click Assign to confirm; the device will reboot with the new IP address.
    Depending on the selected device, you may be prompted to select DHCP or BOOTP protocol for searching and obtaining the new IP address. If you are not familiar with the specific protocols, the default option should be used.