|
void | wiced_bt_dev_confirm_req_reply (wiced_result_t res, wiced_bt_device_address_t bd_addr) |
|
void | wiced_bt_dev_pass_key_req_reply (wiced_result_t res, wiced_bt_device_address_t bd_addr, uint32_t passkey) |
|
void | wiced_bt_dev_pin_code_reply (wiced_bt_device_address_t bd_addr, wiced_result_t res, uint8_t pin_len, uint8_t *p_pin) |
|
wiced_result_t | wiced_bt_dev_read_local_oob_data (void) |
|
void | wiced_bt_dev_remote_oob_data_reply (wiced_result_t res, wiced_bt_device_address_t bd_addr, wiced_bool_t is_extended_oob_data, BT_OCTET16 c_192, BT_OCTET16 r_192, BT_OCTET16 c_256, BT_OCTET16 r_256) |
|
wiced_result_t | wiced_bt_dev_sec_bond (wiced_bt_device_address_t bd_addr, wiced_bt_ble_address_type_t bd_addr_type, wiced_bt_transport_t transport, uint8_t pin_len, uint8_t *p_pin) |
|
wiced_result_t | wiced_bt_dev_sec_bond_cancel (wiced_bt_device_address_t bd_addr) |
|
void | wiced_bt_dev_send_key_press_notif (wiced_bt_device_address_t bd_addr, wiced_bt_dev_passkey_entry_type_t type) |
|
wiced_result_t | wiced_bt_dev_set_encryption (wiced_bt_device_address_t bd_addr, wiced_bt_transport_t transport, void *p_ref_data) |
|
wiced_bool_t | wiced_bt_smp_create_local_sc_oob_data (wiced_bt_device_address_t bd_addr, wiced_bt_ble_address_type_t bd_addr_type) |
|
void | wiced_bt_smp_sc_oob_reply (uint8_t *p_oob_data) |
|
This module defines the generic procedures related to discovery of Bluetooth devices and link management aspects of connecting to Bluetooth devices. It also defines procedures related to use of different security levels.
Function wiced_bt_dev_confirm_req_reply
Confirm the numeric value for pairing (in response to <b>BTM_USER_CONFIRMATION_REQUEST_EVT </b> of #wiced_bt_management_cback_t)
- Parameters
-
[in] | res | : result of the operation WICED_BT_SUCCESS if success |
[in] | bd_addr | : Address of the peer device |
- Returns
- void
Function wiced_bt_dev_pass_key_req_reply
Provide the pairing passkey (in response to <b>BTM_PASSKEY_REQUEST_EVT </b> of #wiced_bt_management_cback_t)
- Parameters
-
[in] | res | : result of the operation WICED_BT_SUCCESS if success |
[in] | bd_addr | : Address of the peer device |
[in] | passkey | : numeric value in the range of 0 - 999999(0xF423F). |
- Returns
- void
Function wiced_bt_dev_pin_code_reply
PIN code reply (use in response to <b>BTM_PIN_REQUEST_EVT </b> in #wiced_bt_management_cback_t)
- Parameters
-
[in] | bd_addr | : Address of the device for which PIN was requested |
[in] | res | : result of the operation WICED_BT_SUCCESS if success |
[in] | pin_len | : length in bytes of the PIN Code |
[in] | p_pin | : pointer to array with the PIN Code |
- Returns
- void
Function wiced_bt_dev_read_local_oob_data
Read the local OOB data from controller (for sending
to peer device over oob message). When
operation is completed, local OOB data will be
provided via BTM_READ_LOCAL_OOB_DATA_COMPLETE_EVT.
Function wiced_bt_dev_remote_oob_data_reply
Provide the remote OOB extended data for Simple Pairing
in response to BTM_REMOTE_OOB_DATA_REQUEST_EVT
- Parameters
-
[in] | bd_addr | : Address of the peer device |
[in] | is_extended_oob_data | : TRUE if extended OOB data (set according to BTM_REMOTE_OOB_DATA_REQUEST_EVT request) |
[in] | c_192 | : simple pairing Hash C derived from the P-192 public key. |
[in] | r_192 | : simple pairing Randomizer R associated with the P-192 public key. |
[in] | c_256 | : simple pairing Hash C derived from the P-256 public key (if is_extended_oob_data=TRUE) |
[in] | r_256 | : simple pairing Randomizer R associated with the P-256 public key (if is_extended_oob_data=TRUE) |
Function wiced_bt_dev_sec_bond
Bond with peer device. If the connection is already up, but not secure, pairing is attempted.
- Note
- PIN parameters are only needed when bonding with legacy devices (pre-2.1 Core Spec)
- Parameters
-
[in] | bd_addr | : Peer device bd address to pair with. |
[in] | bd_addr_type | : BLE_ADDR_PUBLIC or BLE_ADDR_RANDOM (applies to LE devices only) |
[in] | transport | : BT_TRANSPORT_BR_EDR or BT_TRANSPORT_LE |
[in] | pin_len | : Length of input parameter p_pin (0 if not used). |
[in] | p_pin | : Pointer to Pin Code to use (NULL if not used). |
- Returns
WICED_BT_PENDING if successfully initiated,
WICED_BT_SUCCESS if already paired to the device, else
error code
Function wiced_bt_dev_sec_bond_cancel
Cancel an ongoing bonding process with peer device.
- Parameters
-
[in] | bd_addr | : Peer device bd address to pair with. |
- Returns
WICED_BT_PENDING if cancel initiated,
WICED_BT_SUCCESS if cancel has completed already, else error code.
Function wiced_bt_dev_send_key_press_notif
Inform remote device of keypress during pairing.
Used during the passkey entry by a device with KeyboardOnly IO capabilities
(typically a HID keyboard device).
- Parameters
-
[in] | bd_addr | : Address of the peer device |
[in] | type | : notification type |
Function wiced_bt_dev_set_encryption
Encrypt the specified connection.
Status is notified using <b>BTM_ENCRYPTION_STATUS_EVT </b> of #wiced_bt_management_cback_t.
- Parameters
-
[in] | bd_addr | : Address of peer device |
[in] | transport | : BT_TRANSPORT_BR_EDR or BT_TRANSPORT_LE |
[in] | p_ref_data | : pointer to reference data to be passed upon completion (NULL if no data) |
- Returns
WICED_BT_SUCCESS : already encrypted
WICED_BT_PENDING : command will be returned in the callback
WICED_BT_WRONG_MODE : connection not up.
WICED_BT_BUSY : security procedures are currently active
Function wiced_bt_smp_create_local_sc_oob_data
Create local BLE SC (secure connection) OOB data. When
operation is completed, local OOB data will be
provided via BTM_SMP_SC_LOCAL_OOB_DATA_NOTIFICATION_EVT.
- Parameters
-
[in] | bd_addr | : intended remote address for the OOB data |
[in] | bd_addr_type | : BLE_ADDR_PUBLIC or BLE_ADDR_PUBLIC |
- Returns
- TRUE: creation of local SC OOB data set started.
void wiced_bt_smp_sc_oob_reply |
( |
uint8_t * |
p_oob_data | ) |
|
Function wiced_bt_smp_sc_oob_reply
Description Provide the SC OOB data for SMP in response to BTM_SMP_SC_REMOTE_OOB_DATA_REQUEST_EVT
- Parameters
-