Skip to content

config system protocols dhcp

Allows you to set a DHCP base address that the Lantronix Local Manager uses in assigning DHCP addresses to connected devices. Port devices may be configured to acquire DHCP addresses from the system as a part of the config init dialog.

Command availability

CLI resource: system

Lantronix system: All

LMS offerings: All


config system protocols dhcp <base DHCP address>


The base DHCP address parameter is the base address to be used in generating DHCP addresses for connected devices. The default base address is 169.254.100.

[admin@LantronixLM]# config system protocols dhcp 169.254.100

Note: When setting the Local Manager to assign DHCP addresses to devices, the DHCP pool must not overlap with other pools or subnets. The base address must not overlap the system's management IP address or existing static assignments on ports.

In the Lantronix web interface

Inventory > group page > Network > Protocols > DHCP Settings - specific to this inventory group

Inventory > Local Manager page > Network > Protocols > DHCP Settings - specific to this system


3.4 - This command was introduced.

Related commands

  • show system protocols