Skip to content

show post

Displays archived power-on self-test (POST) messages. The self-test is only captured if a device reboots or power cycles.

Command availability

CLI resource: port

Device makes: 3Com, Alcatel, Cisco, HP, iDirect, Juniper, ND Satcom, Netscreen, Nortel, Sun, Tasman, TippingPoint, server

Lantronix Local Managers: All

LMS offerings: All

Syntax

show post [current | previous | archive #]

Specify the POST message to display using the current, previous, or archive # parameter.

Usage

[admin@LantronixLM (port1/2)]# show post
WS-X4012 bootrom version 6.1(5), built on 2003.03.19 16:59:08
H/W Revisions:    Meteor: 4    Comet: 10    Board: 2
Supervisor MAC addresses: 00:02:16:4d:83:00 through 00:02:16:4d:86:ff (1024 addresses)
Installed memory: 64 MB
Testing LEDs.... done!
The system will autoboot in 5 seconds.
Type control-C to prevent autobooting.
rommon 1 >
The system will now begin autobooting.
Autobooting image: "bootflash:cat4000-k8.7-6-7.bin"
......................................................................................
.......................................................###############################
#
Starting Off-line Diagnostics
Mapping in TempFs
Board type is WS-X4012
DiagBootMode value is "post"
Loading diagnostics...
Power-on-self-test for Module 1:  WS-X4012
Status: (. = Pass, F = Fail)
processor: .          cpu sdram: .          eprom: .
nvram: .              flash: .              enet console port: .
switch port 0: .      switch port 1: .      switch port 2: .
switch port 3: .      switch port 4: .      switch port 5: .
switch port 6: .      switch port 7: .      switch port 8: .
switch port 9: .      switch port 10: .     switch port 11: .
switch registers: .   switch sram: .
Module 1 Passed
Exiting Off-line Diagnostics
Testing Switch Chip 0 switching memory...passed.

In the Lantronix web interface

Inventory > Local Manager page > port detail > Files > post - specific to this device

History

1.4 - Locally archived files added.

Related commands

--