config vpn¶

Interactive command to specify VPN for the Lantronix Local Manager after outband connectivity has been established.

Command availability¶

CLI resource: modem/Secondary Ethernet

Lantronix system: All

LMS offerings: All

Syntax¶

config vpn

Usage¶

VPN type is ipsec or pptp.

[admin@A505100087 (modem)]# config vpn
--- Existing  Values ---
VPN Type: none
Change these? (y/n) [n]: y
--- Enter New Values ---
VPN Type [none]: pptp
PPTP Server Hostname or IP: 198.6.1.2
User Name: adent
Password: *******
Confirm Password: *******
MPPE Required (y/n) [n]:
Do you want to commit these changes? (y/n):

[admin@LantronixLM (modem)]# config vpn
--- Existing  Values ---
VPN Type: none
Change these? (y/n) [n]: y
--- Enter New Values ---
VPN Type [none]: ipsec
Vendor [cisco]:
IPsec Server Hostname or IP: 198.6.1.2
IKE DH Group [dh2]:
Perfect Forward Secrecy [server]:
NAT Traversal Mode [none]: cisco-udp
NAT UDP Port [0]: 10000
Allow Single DES (y/n) [n]:
Deny MD5 (y/n) [n]:
Group ID: IPSEC-GROUP
Shared key: *******
Confirm shared key: *******
User Name: adent
Password: *******
Confirm Password: *******
Do you want to commit these changes? (y/n):

In the Lantronix web interface¶

Inventory > Local Manager page > Out-of-Band > VPN - specific to this system

History¶

3.2 - This command was introduced; it replaces config pptp.

3.3 - Added IPsec support.

3.5 - Added Netscreen VPN endpoint

4.1 - Added DES option

4.5 - Added additional key exchange types for IKE and PFS

show vpn